Construction of dehulling machine for improved coffee processing

Adeleke, S.A
Ogunjobi, M.A.K.


A machine was fabricated for dehulling wet-processed coffee using local materials. It was evaluated at different drum and fan speeds using parchment coffee at 10.7 w.b. moisture content. The results obtained indicated that the dehulling efficiency, bean damage and cleaning efficiency increased as the drum and fan speeds increased between 800 – 1400rpm and 1400 – 1900rpm respectively. However, there was no significant difference in dehulling efficiency and bean damage at these speeds (0.05 sig.), but the cleaning efficiency increased significantly at higher fan speeds. The highest average dehulling efficiency, cleaning efficiency and bean damage were respectively 97.59, 93.30 and 6.17%. High dehulling and cleaning efficiencies and low bean damage obtained indicate that the machine is very appropriate to handle coffee processing. Considering the reasonable performance achieved at wide range of the machine operating conditions, this work has a good prospect for commercial coffee production.

How to Cite
Adeleke, S.A, & Ogunjobi, M.A.K. (2016). Construction of dehulling machine for improved coffee processing. Journal of Innovative Agriculture, 3(4), 1-10. Retrieved from


  1. Abo El-Naga, M. H. M. El-Gendy, H.A. and Mosa, E. H. (2015). Evaluation of a Locally Threshing Machine Performance for Threshing Lentil Crop. Misr J. Agric. Eng. 22 (2): 376 – 388.
  2. Adekanye, T. A. and Olaoye, J. O. (2013). Performance Evaluation of Motorized and Treadle Cowpea Threshers. Agric. Eng. Int.: CIGR Journal. 15(4): 300 - 306.
  3. Adekanye, T. A., Osakpamwan, A. B. and Idahosa, Osaivbie, I. E. (2016). Evaluation of a Soyabean Threshing Machine for Small Scale Farmers. Agric. Eng. Int.: CIGR Journal. 18(2): 426 – 434.
  4. Adewumi, B. A. (2005). Development and Performance Evaluation of Equipment for Threshing and Cleaning Legume Crops. P.hD Thesis. Department of Agricultural Engineering. The Federal University of Technology, Akure, Nigeria, p. 187.
  5. Akinwale, T. O. and Oduwole, O. O. (2001). Uses of Coffee and Strategy for Increased Local Utilization. In: Coffee Production Technology, Training Manual. Cocoa Research Institute of Nigeria, CRIN, Ibadan. Nigeria. ISSN:0794 – 6456, pp. 57 – 60.
  6. Barel, M. and Jacquet, M. (1994). Coffee Quality: Its Causes, Appreciation and Improvement. Plant Rech D´evelop 1:5–10.
  7. Bart-Plange, A., Dzisi, A. K., Addo, A., Teye, E. and Kumi, F. (2012). A Comparative Study of Some Physical Properties of Large and Medium Size Cocoa Beans from Ghana. ARPN Journal of Science and Technology, 2(3): 135 – 141
  8. Bello, S. R. and Odey, S. O. (2011). Development and Performance Evaluation of a House Grain Cleaner. In: Proceedings of the 11TH International Conference & 32ND Annual General Meeting of Nigerian Institution of Agricultural Engineers (NIAE), 17th – 20th October, 2011, Ilorin. 32: 576 - 585
  9. Berthaud J., Charrier, A. (1988). Genetic Resources of Coffea L. In Coffee: Agronomy, R J Clarke And R Macrae (Eds). Elsevier Appl. Sci. London. 4: 1-42.
  10. Brian Ssebunya (2011). A Resource Manual for Trainers on Coffee. African Organic Agriculture Training Manual, 9-13. FBL,Research Institute of Organic Agriculture, Switzerland.
  11. Coste, R. (1992). Coffee: The Plant and the Product. Macmillan Press Ltd, London, pp. 1-281.
  12. Dalha, I. B. and Dangora, N. D. (2011). Performance Evaluation of RF450 Thresher for Sorghum. In: Proceedings of the 11TH International Conference & 32ND Annual General Meeting of Nigerian Institution of Agricultural Engineers (NIAE), 17th – 20th October, 2011, Ilorin. 32: 139 - 142
  13. DaMatta, Fábio M., Cláudio, P. Ronchi, Moacyr Maestri and Raimundo, S. Barros (2007). Ecophysiology of Coffee Growth and Production. Braz. J. Plant Physiology, 19(4): 485-510
  14. Davis, A. P., Govaerts, R., Bridson, D. M., Stoffelen, P. (2006). An Annotated Taxonomic Conspectus of the Genus Coffea (Rubiaceae). Bot. J. Linnean Soc. 152: 465-512.
  15. Elnono, M. Ahmed and Allah, H. A. Mohammed (2000). A Study on Power Requirements for Wheat Threshing. Egypt Journal of Agric. Research 78(5): 2169 – 2176.
  16. FAO (1994). Testing and Evaluation of Agricultural Machinery and Equipment. Principles and Practices. Food and Agricultural Organization (FAO) Agric. Services Bulletin No 110.
  17. Farah, A. (2012). Coffee Constituents. In: Coffee Emerging Health Effects and Disease Prevention (ed Y.-F. Chu), Wiley-Blackwell, Oxford, UK. doi: 10.1002/9781119949893.ch2
  18. Federal Government of Nigeria (1985). Coffee. In: Towards Increased Production of ‘Cash’ Crops in Nigeria. Report of the Study Group on Rehabilitation of ‘Cash’ Crops, pp. 34 – 48.
  19. Gbabo, G., Gana, I. M. and Amoto, M. S. (2013). Design, Fabrication and Testing of a Millet Thresher. Net Journal of Agricultural Science. 1(4): 100 – 106.
  20. Hall, A. S, Holowenko, A. R. and Laughlin, H. G. (1980). Theory and Problems of Machine Design. Schaum Outline Series. McGraw Hill Book Co, pp. 120
  21. Habtamu Lemma Didanna, (2014). A Critical Review on Feed Value of Coffee Waste for Livestock Feeding. World Journal of Biology and Biological Sciences, 2 (5): 072-086.
  22. Hollatz, B. and Quick G. R., (2003). Combine Tailings Returns, Part 1: The Effects of Combine Performance and Settings on Tailings. In: e- Proceedings of the International Conference on Crop Harvesting and Processing. Kentucky USA. ASAE Publication Number 701P1103e, pp 18-22.
  23. Interafrican Coffee Organization (2006). Summary Report. Workshop on Reducing Poverty in Africa by Strengthening Coffee Projects. (Eds) Ronald J.Onzima. and P. Mbondji Mbondji. 13th – 17th November, 2001, Abidjan, Cote d’Ivore, pp. 1 – 17.
  24. International Coffee Organization (2001). Health Effects from Coffee Consumption. In: Coffee Futures. A Source Book of Some Critical Issues Confronting the Coffee Industry. Baker, P.S (Ed). The Commodities Press, pp. 8 – 15.
  25. Miu, P. L. (2003). Stochastic Modelling of Separation Process on Combine Cleaning Shoe. In: E-Proceedings of The International Conference On Crop Harvesting and Processing. ASAE publication, pp. 11.
  26. Morten S., (2004). Bitter or Better Future for Coffee Producers. International Trade Centre. Issue 2.
  27. Mott, R. L. (2003). Machine Elements in Mechanical Design. 4th edition. Prentice Hall, pp.388-400.
  28. Muhammad, U. S., Abubakar, L. G., Isiaka, M. and Davies, R. M. (2013). Design and Evaluation of a Cleaning Machine. App. Sci. Rep., 1 (3): 62 – 66.
  29. Oduwole, O. O. and Sanusi, R. A. (2001). Coffee marketing problems and prospects. Coffee production technology. Training manual. Cocoa Res. Inst. of Nigeria, Ibadan, pp. 51–55.
  30. Olalusi, A. P.and Bolaji, O. T. (2010). Some Engineering Properties of an Indigenous Grown
  31. Jatropha Seeds “Lapalapa”. Electronic Journal of Environmental, Agricultural and Food Chemistry., 1760 – 1771.
  32. Oloko, S. A. (2004). Design and fabrication of a melon deppoding machine. M. Eng. thesis. Department of Agricultural Engineering. Federal University of Technology, Akure, p. 10
  33. Olukunle, O. J. (2002). Development and Evaluation of an Indigenous Grain Combine Harvester. Ph.D Thesis, Dept. of Agric. Engineering. Federal University of Technology, Akure, Nigeria, p. 195.
  34. Omolaja, S. S. and Obatolu, C. R. (1996). Characterization of Robusta Coffee (Coffea canephora) Clones Using Index Score Technology. Nigerian Journal of Botany, 9: 41-48.
  35. Ozguven, F. and Vursavus, K. (2005). Some Physical, Mechanical and Aerodynamic Properties of Pine Nuts. Journal of food engineering, 68: 185-193.
  36. Pearl, H. M., Nagai, C., Moore P. H., Steiger, D. L., Osgood, R. V., Ming, R. (2004). Construction of a Genetic Map for Arabica Coffee. Theor. Appl. Genet., 108: 829-835.
  37. Potchet, P. (1990). The Quality of Coffee from Plantlet to Cup. Agricultural Publications, 21:43
  38. Practical Action (2011). Small-scale Coffee Processing. Technical Brief. The Schumacher Centre for Technology & Development, Bourton Hall, Rugby, UK, pp. 1 - 8
  39. Raji, A.O. and Akaaimo, D.I. (2005). Development and Evaluation of a Threshing Machine for Prosopis africana Seed. Journal of Applied Science, Engineering and Technology, 5 (1&2): 56-62.
  40. Sadhu, S. (2005). Machine Design (S.I Units). Khanna Publishers, Nai Sarak, Delhi, pp. 705
  41. Sessiz, A., Escgici, R. and Kizil, S. (2007). Moisture-dependent Physical Properties of Caper (Capparis ssp.) Fruit. Journal of Food Engineering, 79: 1426 – 1431.
  42. Simoyan, K. J and Oni, K. C. (2001). Performance Evaluation of a Motorized Locust Bean Decorticator. Journal Agricultural Technology, 9(1): 55 – 65.
  43. Simoyan, K. J. and Yiljep, Y. D. (2008). Investigating Grain Separation and Cleaning Efficiency Distribution of a Conventional Stationary Rasp-bar Sorghum Thresher. Agricultural Engineering International: the CIGR E Journal. Manuscript PM 07 028. 10: 1 – 11.
  44. Soja, J. J., Kallah, M. A., Sanbauna, S. A. and Kute, M. T. (2004). Design and Prototype Development of a Motorized Rice Thresher. NJERD, 3(1): 213 - 217
  45. Williams, J. A. (1989). Progress in Tree Crop Research (2nd Edition). Cocoa Research Institute of Nigeria, Ibadan. Pp. 127 – 140.
  46. World Bank (1985). Agro-Industry Profiles on Coffee Report: Project File. Washington. No S698. A37 FAU 14. pp. 1 – 21.